Ruedamann® Loading Ramp Aluminum Ramp 2PC
Ruedamann® Loading Ramp Aluminum Ramp 2PC
- 10% OFF Available to Sitewide!
【Portable and Lightweight】Approximately 11.4 pounds (5.2kg) of lightweight aluminum is used for construction. The dimensions of the ramp when unfolded is 78.7"L x 8.5"W x 1.6"H (200 x 21.5 x 4cm). Size when folded: 39.4"L x 8.5"W x 4.7"H (100 x 21.5 x 12cm). It is easy to carry and store with its foldable design.
【Strong and Durable Construction】For safety purposes, the yellow warning label is visible at night. It is constructed from a sturdy, rust resistant aluminum. High quality hinge can support up to 600 lbs (300kg) and are strong and great load bearers. It is advised to use a height of less than 19.7" (50cm). Further it is suitable for vehicles with tyres less than 7.5" (190mm) wide in the section. Please confirm that our product's size is appropriate for the location you intend to use it.
【Non-Slip Rubber Pad and Strong Traction】At the top of the ramp, a non-slip rubber pad is attached to the rear to ensure user safety, prevent slippage during operation, and reduce noise. For a better skid resistance, apply non-slip tape to both ends of the surface. The ramps punching surface adds exceptional traction in any weather.
【Easy to Use】The ramp's wider area of ground contact, best load bearing, and ease of ascending are all made possible by the extended tail-plate design at both ends. It is Simple to set up and no assembly is required. You can feel free to utilize aluminum alloy because it has a high degree of hardness, toughness and durability.
【Versatile Usage】Bicycles, motorcycles, dirt bikes, and other two-wheeled vehicles can all be loaded using ramps. Additionally, it can be utilized to store equipment for ATVs, trucks, quads, lawnmowers and snowblowers in sheds, barns, and garages. Do not ride the equipment to ascend or descend the ramp. Warranty period of our ramp is 1-year, artificial damage is not within the warranty period.
We will deliver the goods within 24 hours after receiving the payment, except for weekends and holidays.Normally, delivery to the lower 48 states of the United States usually takes 3-7 working days（except special circumstances）.
Returnable within 30 days.Return Policy
Warranty period of our ramp is 1-year, artificial damage is not within the warranty period.
Whatever you need, wherever you are, we're happy to help you.
Your message will be sent to our customer service center. We will respond to you as soon as possible.
How to choose a ramp?
Ruedamann wheelchair ramps are one of the best-selling mobility ramps in the United States and are widely used in the commercial, transportation industry, healthcare and nursing home industries, and private individuals. We know you may also be wondering how to choose the best ramp, so we’ve created this guide to help ensure you get the best ramp for your purposes.
1. First you need to measure the steps, stairs, thresholds, curbs, vehicles, etc. where the ramp will be placed:
(1) Measure the total vertical height from the ground to where the ramp is placed, which we call the "vertical height". (See below)
(2) Measure the total length of the steps to ensure the ramp is long enough to overcome the steps. (See below)
2. Understand the slope ratio.
Common slope ratios are: 1:4; 1:6; 1:8; 1:10 (see the figure below).
For manual wheelchairs, our recommended slope ratio is 1:6. For example, for a 1 cm rise (vertical height) you will need a 6cm long ramp. If you have a larger space for the ramp, you can buy a longer ramp than recommended as this means you will have less effort and easier going up and down the steps. Note: 1:4 is the maximum height.
3. We also recommend checking the threshold and whether there is any height inside the steps.
For situations where the interior height is low, bridge-type sill ramps are often the perfect solution.
4. Choice of width.
Your ramp should be wide enough to accommodate your wheelchair/scooter, but narrow enough to accommodate your threshold. For this reason, we offer a range of widths for you to choose from.
Our normal folding ramps are 72cm wide, and we also offer extra-wide folding ramps with a width of 85cm. Telescopic ramps require you to check whether the tire width of the wheelchair or scooter you are using exceeds the inner width of the telescopic ramp. The inner width of our telescopic ramps is in the range of 15-25cm.
Note: Since the side height of all telescopic ramps is 5cm, the chassis height of the wheelchair must be greater than 5cm. If the bottom of the chassis is too low, the wheelchair will get stuck on the side tubes of the ramp.
5. Contact us.
If the above article does not answer your questions, please contact us with your questions.