Ruedamann Portable Wheelchair Ramp, Adjustable Aluminum Ramp for Home, 600lbs Capacity,Telescoping Non-Skid Surface Wheel Chair Ramp for Home, Stairs, Steps
Ruedamann Portable Wheelchair Ramp, Adjustable Aluminum Ramp for Home, 600lbs Capacity,Telescoping Non-Skid Surface Wheel Chair Ramp for Home, Stairs, Steps
- 10% OFF Available to Sitewide!
Couldn't load pickup availability
【Adjustable Length Design】Our wheelchair ramps have exclusive locking design, compared with other products, our aluminum ramps are fixed by locking, which can be extended to the length you want, instead of only stretching to the longest or shortest. All locks in the Non-Skid Surface Ramp are made of stainless steel
【Aluminum Material & High Capacity】The wheelchair ramp is made from non-rust, slip-proof, water-resistant aluminum, Non-Skid Surface Ramp can holds up to 800 lb (400kg) capacity, 600 lb (300kg) impact capacity
【Anti-slip surface & Easy to carry】Emery film design, Surface of the wheelchair ramp is pasted with anti-slip film which is with high traction and anti-skid ability, We use the handle design for easy carrying (the packaging design of the tote bag may be wet in rainy weather)
【Anti-scratch edge design】The edges of our products are treated, Compared with other products, the edge of our wheelchair ramp is not so sharp, and hands will not be hurt, which enhances the safety performance
【Versatile use】This wheelchair ramp is made for indoor or outdoor steps,stairs,curbs,handicaps,doorways and etc. Please don't use motorcycles or power wheelchairs on this ramp
【mension & Recommended height 】
3-5FT：60.2"L x 8.3"W x 1.6"H
The wheelchair ramp is 5' (153cm) L * 8.3" (21cm) outer W *1.6"(4cm)H, used height is from 6"-15" (15-37.5cm). Best for 10" (25cm)
3.5-6FT：72.2"L x 8.3"W x 1.6"H
The wheelchair ramp is 7' (214cm) L * 8.3" (21cm) outer W *1.6"(4cm)H, used height is from 8.4"-21" (21-52.5cm). Best for 14" (35cm)
4-7FT：84.3"L x 8.3"W x 1.6"H
The wheelchair ramp is 7' (214cm) L * 8.3" (21cm) outer W *1.6"(4cm)H, used height is from 8.4"-21" (21-52.5cm). Best for 14" (35cm)
4.5-8FT：96.1"L x 8.3"W x 1.6"H
The wheelchair ramp is 8' (244cm) L * 8.3" (21cm) outer W *1.6"(4cm)H, used height is from 9.6"-24" (24-60cm). Best for 16" (40cm)
Collapsible content
Shipping
We will deliver the goods within 24 hours after receiving the payment, except for weekends and holidays.Normally, delivery to the lower 48 states of the United States usually takes 3-7 working days（except special circumstances）.
Return
Returnable within 30 days.Return Policy
Warranty
Warranty period of our ramp is 1-year, artificial damage is not within the warranty period.
Contact
Whatever you need, wherever you are, we're happy to help you.
Your message will be sent to our customer service center. We will respond to you as soon as possible.
How to choose a ramp?
Ruedamann wheelchair ramps are one of the best-selling mobility ramps in the United States and are widely used in the commercial, transportation industry, healthcare and nursing home industries, and private individuals. We know you may also be wondering how to choose the best ramp, so we’ve created this guide to help ensure you get the best ramp for your purposes.
1. First you need to measure the steps, stairs, thresholds, curbs, vehicles, etc. where the ramp will be placed:
(1) Measure the total vertical height from the ground to where the ramp is placed, which we call the "vertical height". (See below)
(2) Measure the total length of the steps to ensure the ramp is long enough to overcome the steps. (See below)
2. Understand the slope ratio.
Common slope ratios are: 1:4; 1:6; 1:8; 1:10 (see the figure below).
For manual wheelchairs, our recommended slope ratio is 1:6. For example, for a 1 cm rise (vertical height) you will need a 6cm long ramp. If you have a larger space for the ramp, you can buy a longer ramp than recommended as this means you will have less effort and easier going up and down the steps. Note: 1:4 is the maximum height.
3. We also recommend checking the threshold and whether there is any height inside the steps.
For situations where the interior height is low, bridge-type sill ramps are often the perfect solution.
4. Choice of width.
Your ramp should be wide enough to accommodate your wheelchair/scooter, but narrow enough to accommodate your threshold. For this reason, we offer a range of widths for you to choose from.
Our normal folding ramps are 72cm wide, and we also offer extra-wide folding ramps with a width of 85cm. Telescopic ramps require you to check whether the tire width of the wheelchair or scooter you are using exceeds the inner width of the telescopic ramp. The inner width of our telescopic ramps is in the range of 15-25cm.
Note: Since the side height of all telescopic ramps is 5cm, the chassis height of the wheelchair must be greater than 5cm. If the bottom of the chassis is too low, the wheelchair will get stuck on the side tubes of the ramp.
5. Contact us.
If the above article does not answer your questions, please contact us with your questions.
Customer Reviews
We keep this handy for a relative who uses a wheelchair. It’s not too heavy, and can easily be set up and taken down each time she visits.
Works great. There was no damage to the ramps.
Sturdy yet light. Work fantastic. Easy to use. Clip is very secure. I was worried about the clip at first, but it dies a fantastic job. No worries about the clip.
These are super easy to telescope in and out. And they have a low enough profile to stash beneath the bike once in the car.
